JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E Override Automatic Tracking, Adjust Tracking

14EN

PLAYBACK (cont.)

Manual Tracking

DEX

q

REVIEW

PLAY
	STOP
¢	¢

Á1

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.

TVPROG. PAUSE REW FF

1	2	3	REVIEW
4	5	6
7/	8	9
	0	4
2
LAY			TV PROG.
1	3	Á	FF
REW	7	8
¦			PAUSE
1	4	¢
STOP
			PUSH JOG
3

OVERRIDE AUTOMATIC

TRACKING

	Press SP/LP (	) on the remote to engage manual
1 tracking.
	ADJUST TRACKING
	MANUALLY
2 Press TV PROG. + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press SP/LP (	) on the remote to re-engage auto-
3 matic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1

2

LOAD A CASSETTE

Insert a cassette recorded in NTSC.

START PLAYBACK

Press PLAY.

●"NTSC" appears on the screen for about 5 seconds.

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.