JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E Select Item, Delete Channel, Close Confirmation

36ENTUNERSET(cont.)

Storing Channels Manually

Store channels that were not stored during Auto Set Up (☞ pg. 4) or Auto Channel Set (☞ pg. 34).

Perform steps 1 and 2 of the previous procedure to access the Confirmation screen before continuing.

	ACCESS MAIN MENU
1 Press MENU twice.
	ACCESS CONFIRMATION
	SCREEN
	Press PUSH JOG%Þto move the highlight bar (pointer)
	to “MANUAL CH SET”, then press OK. The Confirma-
2 tion screen appears.
	SELECT POSITION
	Press PUSH JOG	%%until an open position in
%Þ
which you want to store a channel begins blinking,
3 then press OK. The Manual Ch. Set screen appears.
	INPUT CHANNEL
	The number "01" appears blinking beneath "CH".
	Press the NUMBER keys to input the channel number
4 you want to store.
	● For fine tuning adjustment, press PUSH JOG%until
	the item beneath "CH" begins blinking, then press
	PUSH JOG . While tuning, “F+” or “F–” appears.
%Þ

●If necessary, to change the band between CH(regular)

and CC(cable), press PUSH JOGÞ%until CH or CC is blinking, then press PUSH JOG %Þ to select the band.

●When storing a channel that sends scrambled

broadcasts, press PUSH JOG %until "OFF" (Decoder setting) blinks, then press PUSH JOG%Þ to set "DECODER" to "ON" ("OFF" is the default setting).

	ENTER NEW CHANNEL
5	INFORMATION
	Press OK and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.

6	CLOSE CONFIRMATION SCREEN
	Press MENU.
	● To input the station name, see page 37.
	● To change positions, see "Change Station Channel
	Position" (at right).

When Receiving A Scrambled Broadcast

Make sure that "AV2 SELECT" is set to "DECODER" (☞ pg. 30).

1– Perform steps 1 and 2 above.

2– Press PUSH JOG%ÞÞ%to select the position of the channel broadcasting the scrambled programmes, then press OK three times.

3– Press PUSH JOG %until "OFF (Decoder setting)" begins blinking, and set it to "ON" by pressing PUSH JOG%Þ.

4– Press OK to access the Confirmation screen.

●Repeat steps 2 – 4 for each additional channel. 5– Press MENU.

Delete A Channel

1		SELECT ITEM
		Press PUSH JOG %%until the item you want to
	%Þ
	delete begins blinking.
2		DELETE CHANNEL
		Press CANCEL.
		● The item directly beneath the cancelled one moves
		up one line.
		● Repeat steps 1 and 2 as necessary.
		CLOSE CONFIRMATION
3		SCREEN
		Press MENU.

Change Station Channel Position

1		SELECT ITEM
		Press PUSH JOG%Þ%%until the item you want to
	move begins blinking. Then press OK and the station
	name (ID) and its channel (CH) number begin blinking.
2		SELECT NEW POSITION
		Press PUSH JOG%Þ%%to move the station to the new
	channel position, then press OK.
	Example: If you moved the station in position 3 to
	position 7, the stations originally in positions 4–7 each
	move up one space.
		● Repeat steps 1 and 2 as necessary.
		CLOSE CONFIRMATION
3		SCREEN
		Press MENU.