Index Search
Your recorder automatically marks
index codes at the beginning of£ 2 each recording. This function gives
you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
1 | ACTIVATE INDEX SEARCH |
Press PUSH JOGÞor%(ª or £) on the remote | |
control or INDEX ª or £ on the recorder. “ª | |
1” or “£ 1” is displayed on screen and search begins | |
| in the corresponding direction. |
●To access index codes 2 through 9, press PUSH JOG
Þor%or INDEX ª or £ repeatedly until the | ||||
correct index number is displayed. |
| |||
Ex.: To locate the beginning of B from the current | ||||
position, press | PUSH JOGÞor INDEX ªtwice. | |||
To locate the beginning of D from the current | ||||
position, press PUSH JOG%or INDEX £ once. | ||||
Current position |
| |||
A | B | C | D E | F |
1 | 2 | 3 | ||
| % |
| % |
|
Index number
●When the specified index code is located, playback begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
E
N
15
Repeat Playback
Your video recorder can automatically play back the whole tape 20 times repeatedly.
1 |
| START PLAYBACK |
| Press PLAY. | |
|
| ACTIVATE REPEAT |
2 |
| PLAYBACK |
| Press PLAY and hold for over 5 seconds, then release. | |
|
| |
| ● The Play indicator ($) on the display panel blinks | |
| slowly. | |
|
| ● The tape plays 20 times automatically, and then |
|
| stops. |
|
|
|
3 |
| STOP PLAYBACK |
| Press STOP at any time to stop playback. |
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Information On Colour
System
You can also record SECAM signals, or play back a MESECAM tape on this recorder. When a MESECAM tape is played back, "MESECAM" appears on the screen for about 5 seconds.
MESECAM is the designation for tapes with SECAM signals that have been recorded on a
Tape Position Indicator
ACTIVATE INSTANT
REVIEW
1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last
The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback
The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “5” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.
”O.S.D.” (☞ pg. 20) must be set to “ON”, or the indicator will not appear.
0
Beginning
3
+
+ +
1:23:45 REMAIN 2:35
End
automatically. You can access a programme as far as 9 index codes away from the current tape position.
NOTE:
NOTE:
Depending on the type of tape used, there may be times when the indication is not correct.
Instant ReView is not possible while the recorder is in the Timer mode.
