JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E Edit To Or From Another Video Recorder

30EN

EDITING

Edit To Or

From Another

Video

Recorder

1 2 3

4 5 6

7/ 8 9

0 4

NUMBER "0"

2

TV PROG.

1	3	Á
¦	7	8
1	4	¢
MENU		PUSH JOG
3

OK

You can use your video recorder as the source player or the recording deck.

	MAKE CONNECTIONS
	Connect the player’s 21-pin SCART connector to the
	recorder’s 21-pin SCART connector as illustrated on
1 page 33.
	When Using Your Video Recorder As The Source
	Player . . .
	. . . connect its AV1 IN/OUT connector to the recording
	deck.
	When Using Your Video Recorder As The Recording
	Deck . . .
.	. . . connect its AV2 IN/DECODER or AV1 IN/OUT
	connector to the source player.

SET RECORDING DECK’S INPUT MODE

2 Set to AUX. With this video recorder, press NUMBER key "0" and/or TV PROG. to select depending on the connector being used — “AU-1” for the AV1 IN/OUT connector, or “AU-2” for the AV2 IN/DECODER connector.

● When using the AV2 IN/DECODER connector, make sure "AV2 SELECT" is set to "AV2" (see below).

START SOURCE PLAYER

3 Engage its Play mode.

START RECORDING DECK

4 Engage its Record mode.

NOTE:

All necessary cables can be obtained from your dealer.

AV2 SELECT Setting

1Press MENU twice to access the Main Menu screen.

2Press PUSH JOG %Þto move the highlight bar (pointer) to "MODE SET", then press OK.

3Press PUSH JOG %Þto move the highlight bar (pointer) to "AV2 SELECT".

4Press PUSH JOG Þ to move the highlight bar (pointer) to your choice:

a–AV2 : To use this recorder as the recording deck with the player connected to the AV2 IN/DECODER connector.

b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.

5 Press MENU to return to normal screen.

MODE SET

AUTO TIMER	: OFF
O. S. D.	: ON
B. E. S. T.	: ON
AV2 SELECT	: AV2

● If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing.	[5°] = [5] : AV2/DECODER
	[MENU] : EXIT

●If you're not using a decoder, leave "AV2 SELECT" set to "AV2".

●The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT" back to "DECODER".