3. Preparation
Ringer type
LYou can select the ringer types from one of 3 types for outside calls (feature #17 on page 27).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
3.4 Dialling mode
If you cannot dial (page 18), change this setting depending on your telephone line service. For tone dial service, select “TONE” (default). For rotary pulse dial service, select “PULSE”.
{A}{B}{<}{>} {SET} {MENU}
1Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2Press {<} or {>} repeatedly to display the following.
DIALLING MODE
=TONE [±]
3Press {A} or {B} repeatedly to display the desired setting.
4Press {SET}.
LThe next feature will be displayed.
5Press {MENU}.
3.5 Date and time
You must set the date and time.
LThe other party’s fax machine will print the date and
time on each page you send according to your unit’s date and time setting.
LThe accuracy of the clock is approximately ±60
seconds a month.
LIf a power failure occurs, the date and time setting may be lost. If the correct date and time is not
displayed after the power has been restored, set the date and time again.
{<}{>} {MENU}
{SET}
1Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2Press {<} or {>} repeatedly to display the following.
SET DATE & TIME
PRESS SET
3Press {SET}.
LThe cursor () will appear on the display.
M:01/D:01/Y:06
TIME: 12:00AM
4Enter the current month/date/year by selecting 2 digits for each.
Example: August 10, 2006 Press {0}{8} {1}{0} {0}{6}.
M:08/D:10/Y:06
TIME: 12:00AM
5Enter the current hour/minute by selecting 2 digits for each. Press {*} repeatedly to select “AM”, “PM”, or
L When neither “AM” nor “PM” are displayed, 24- hour time entry is selected.
Example: 15:20
M:08/D:10/Y:06
TIME: 15:20
6Press {SET}.
LThe next feature will be displayed.
7Press {MENU}.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect number, and make the correction.
3.6 Your logo
Your logo will be printed on the top of each page sent from your unit.
10
