Panasonic KX-FT934HK, KX-FT932HK manual Advanced features

8. Programmable Features

Code #13: Setting the dialling mode

DIALLING MODE

=TONE [±]

See page 10 for details.

Code #17: Setting the ringer type for outside calls

EXT RINGER TYPE

=RINGER 1 [±]

To set the ringer type from one of 3 types for outside calls. You can select “RINGER 1” (default), “RINGER 2” or “RINGER 3”.

8.3 Advanced features

See page 26 for how to enter advanced feature programming.

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

=ON[±]

“ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 18).

“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions.

Code #23: Sending documents overseas

OVERSEAS MODE

=ERROR [±]

If you cannot send a fax overseas even if the number is correct and the line is connected, activate this feature before sending the fax.

This feature improves the reliability by reducing the transmission speed.

“ERROR” (default): When the previous fax transmission fails and you wish to re-send the document.

“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.

“OFF”: Deactivates this feature.

Note:

LThis feature is not available for broadcast transmission.

LCalling charges may be higher than usual.

Code #25: Sending a fax at a specific time

DELAYED SEND

=OFF [±]

This feature allows you to take advantage of low-cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.

To send a document:

1.Insert the document.

2.If necessary, press {A} or {B} repeatedly to select the desired resolution (page 18).

3.Press {MENU}.

4.Press {#} then {2}{5}.

5.Press {A} or {B} repeatedly to select “ON”.

6.Press {SET}.

7.Enter the fax number.

8.Press {SET}.

9.Enter the transmission start time.

LIf you select 12-hour time entry when you set the date and time (page 10), press {*} repeatedly to select “AM” or “PM”.

LIf you selected 24-hour time entry when you set the date and time (page 10), the time is set using 24-hour time entry.

10.Press {SET}.

11.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

=OFF [±]

“ON”: The Caller ID list will be printed automatically each time the unit logs 30 different callers (page 15).

“OFF” (default): The Caller ID list will not be printed, but the unit will keep a record of the information for the last 30 different callers.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

=OFF [±]

See page 24 for details.

Code #36: Receiving oversized documents

RCV REDUCTION

=ON [±]

To slightly reduce the received fax image when printing, so that the received document will be approximately the same length as the original document.

“ON” (default): The received fax image will be printed slightly smaller than the original image.

“OFF”: Deactivates this feature. The received fax image will be printed at the same size as the original image.

Note:

LA slight margin will be added to the printed documents, and therefore if this feature is turned OFF, the received document will be slightly longer than the original document.

27