Panasonic KX-FT932HK, KX-FT934HK manual Caller ID service, For stations

14

Select the desired station key.

For stations 1–5:

Press the desired station key.

2

Lift the handset or press {MONITOR}.

1

To correct a mistake

1. Press {<} or {>} to move the cursor to the incorrect character/number.

2. Press {STOP}.

L To erase all characters/numbers, press and hold {STOP}.

3. Enter the correct character/number.

4.2.2 Making phone calls using the one- touch dial

Before using this feature, store the desired names and telephone numbers for the one-touch dial feature (page 13).

Press {STOP}.

7

other items, repeat steps 2 to 6.

Enter the telephone number, up to 24 digits.

Press {SET}.

4

5

6 Press {SET}. L To program

For stations 1–5:

Press one of the station keys.

For stations 6–10:

Press {LOWER}, then press one of the station keys.

3 Enter the name, up to 16 characters (see page 11 for instructions).

Select the desired station key.

2

4.2.1 Storing one-touch dial items

1 Press {MENU} repeatedly to display “PHONEBOOK SET”.

{MONITOR}

{MENU}

{A}{B}{<}{>} {SET}

{STOP}

4. Telephone

L You can also send faxes using the one-touch dial feature (page 19).

Station keys {LOWER}

For stations 6–10:

Press {LOWER}, then press the desired station key.

LThe unit will start dialling automatically.

4.2.3Editing a stored item

1Press {>}.

2Press {A} or {B} repeatedly to display the desired item.

3Press {MENU}.

4Press {*}.

LIf you do not need to edit the name, skip to step 6.

5Edit the name. For further details, see the storing procedure on page 14.

6Press {SET}.

LIf you do not need to edit the telephone number, skip to step 8.

7Edit the telephone number. For further details, see the storing procedure on page 14.

8Press {SET}.

4.2.4 Erasing a stored item

1Press {>}.

2Press {A} or {B} repeatedly to display the desired item.

3Press {MENU}.

4Press {#}.

LTo cancel erasing, press {STOP}.

5Press {SET}.

4.3 Caller ID service

This unit is compatible with Caller ID service offered by your local telephone company. To use this feature, you must subscribe to Caller ID service.

Important:

LThis unit will only display the caller’s telephone number and name.

LThis unit will not support future additional telephone services.

LThis unit cannot support services based on the

“DTMF based subscriber line protocol”.

LDepending on the service of the local telephone company, the date/time of the call or the caller’s

name may not be displayed.

Make sure the following ring setting is set to 2 or more rings beforehand.

–FAX ring setting (feature #06 on page 26)

–TEL/FAX ring setting (feature #78 on page 28)