4. Telephone
16
4.5 Editing a caller’s telephone
number before calling back
1Press {CALLER ID}.
2Press {A} or {B} repeatedly to display the desired
item.
3Press {CALLER ID} to display the telephone
number.
4To insert a number in front of the telephone number,
press the desired dial key ({0} to {9}).
LYou can also initiate the editing mode by
pressing {*}.
5Lift the handset or press {MONITOR} to call back
the edited number.
LThe unit will start dialling automatically.
LTo send a fax, insert the document FACE DOWN
and press {FAX/START}.
Note:
LThe edited telephone number will not be saved as
caller information. To store it into the phonebook, see
page 17.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you
want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the position to
the right of where you want to insert the number.
2. Enter the number.
4.6 Erasing caller information
Erasing all caller information
1. Press {MENU} repeatedly to display “CALLER
SETUP”.
2. Press {SET}.
L“CALL LIST ERASE” will be displayed.
3. Press {SET}.
LTo cancel erasing, press {STOP} 3 times.
4. Press {SET}.
5. Press {STOP}.
Erasing specific caller information
1. Press {CALLER ID}.
2. Press {A} or {B} repeatedly to display the desired
item.
3. Press {<}.
LTo cancel erasing, press {STOP} 2 times.
4. Press {SET}.
LTo erase other items, repeat steps 2 to 4.
5. Press {STOP}.
4.7 Storing caller information into
the phonebook / one-touch dial
Important:
LThis feature is not available if the caller
information does not include a telephone
number.
{STOP}
{CALLER ID}
{FAX/START}{A}{B}{<}{>}
{MONITOR}
{STOP}
{CALLER ID}
{A}{B}{<}
{SET}
{MENU}
FT932_934HK-PFQX2561YA-en.book Page 16 Monday, May 8, 2006 5:05 PM