8. Programmable Features
8.1 Programming
{A}{B}{<}{>} {SET} {MENU}
8.1.1 Programming basic features
1Press {MENU}.
2Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired feature.
L The current setting of the feature will be displayed.
3Press {A} or {B} repeatedly to display the desired setting.
L This step may be slightly different depending on the feature.
4Press {SET}.
LThe setting you selected is set, and the next feature will be displayed.
5To exit programming, press {MENU}.
8.1.2 Programming advanced features
1Press {MENU}.
2Press {<} or {>} repeatedly to display “ADVANCE SETTINGS”.
3Press {SET}.
4Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired feature.
L The current setting of the feature will be displayed.
5Press {A} or {B} repeatedly to display the desired setting.
L This step may be slightly different depending on the feature.
6Press {SET}.
LThe setting you selected is set, and the next feature will be displayed.
7To exit programming, press {MENU} at any time.
To program by entering the program code number directly
You can select a feature by directly entering its program code (# and a
1.Press {MENU}.
2.Press {#} and the
3.Press {A} or {B} repeatedly to display the desired setting.
L This step may be slightly different depending on the feature.
4.Press {SET}.
5.To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit.
8.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 10 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 10 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 12 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission results (page 18).
“ERROR” (default): A sending report will be printed only when fax transmission fails.
“ON”: A sending report will be printed after every transmission.
“OFF”: The sending reports will not be printed.
Code #06: Changing the ring setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “1”, “2” (default), “3”, “4” or “5 EXT.TAM”.
26
