11. General Information
11.2 Specifications
■Applicable lines:
Public Switched Telephone Network
■Document size:
Max. 216 mm in width, Max. 600 mm in length
■Effective scanning width: 208 mm
■Recording paper size: 216 mm × max. 30 m roll
■Effective printing width: 208 mm
■Transmission time*1:
Approx. 15 s/page (Original mode)*2
■Scanning density: Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution, 7.7 lines/mm – in fine/photo resolution,
15.4 lines/mm – in super fine resolution
■Photo resolution:
■Scanner type: Contact Image Sensor
■Printer type: Thermal printing
■Data compression system:
Modified Huffman (MH), Modified READ (MR)
■Modem speed:
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
■Operating environment:
5 °C – 35 °C, 20 % – 80 % RH (Relative Humidity)
■Dimensions:
Approx. height 121 mm × width 352 mm × depth 224 mm
■Mass (Weight):
■Power consumption: Standby: Approx. 1.5 W Transmission: Approx. 13 W
Reception: Approx. 30 W (When receiving a 20 % black document)
Copy: Approx. 35 W (When copying a 20 % black document)
Maximum: Approx. 110 W (When copying a 100 % black document)
■Power supply:
220 V – 240 V AC, 50/60 Hz
■Fax memory capacity*3:
Approx. 28 pages of memory reception
(Based on the
*1 Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other party’s machine.
*2 Transmission speed is based upon the
*3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will be retained in memory.
ITU-T No. 1 Test Chart
Note:
LDesign and specifications are subject to change
without notice.
LThe pictures and illustrations in these instructions may vary slightly from the actual product.
LThe suffix in the model number will be omitted in
these instructions.
LMost figures shown in these operating instructions are based on a
39
