Manuals / Homelite / Lawn and Garden / Chainsaw

Homelite UT10510A Maintenance, Danger, Assembling The Bar And Chain, See Figures 36 through, Page

Models: UT10510A

1 36

Download 36 pages 38.37 Kb

Page 22

Image 22

MAINTENANCE

ASSEMBLING THE BAR AND CHAIN

See Figures 36 through 44.

DANGER:

Never start the engine before installing the guide bar, chain, drivecase cover, and clutch drum. Without all these parts in place, the clutch can fly off or explode exposing the user to possible serious injury.

WARNING:

To avoid serious personal injury, read and under- stand all the safety instructions in this section.

1.Always place the switch in the stop “” position before you work on the saw.

3.Wear gloves when handling the chain and bar. These components are sharp and may contain burrs.

4.Remove the bar mounting nuts using a combination wrench or 5/8 in. wrench.

5. Remove the clutch cover, and the outer guide bar plate.

Page 22

COMBINATION

WRENCH

BAR MOUNTING NUTS

Fig. 35

CLUTCH

COVER

GUIDE BAR

PLATE

BAR MOUNTING NUTS

Fig. 36

Page 22

Image 22

Homelite UT10510A manual Maintenance, Danger, Assembling The Bar And Chain, See Figures 36 through, Page

Contents

14 in. 356 mm 33cc Chain Saw SAVE THIS MANUAL FOR FUTURE REFERENCEOPERATORS MANUAL Model No. UT10510, UT10510A, UT10901A, UT10901BINTRODUCTION TABLE OF CONTENTSPage READ ALL INSTRUCTIONS GENERAL SAFETY RULESPage SAFETY APPAREL SPECIFIC SAFETY RULESGENERAL PRECAUTIONS BASIC PRECAUTIONS IN THE CUTTING/ WORK AREASPECIFIC SAFETY RULES MAINTENANCE PRECAUTIONSKICKBACK PUSH AND PULLNAME SYMBOLSSYMBOL EXPLANATIONSYMBOLS SPECIFICATIONSSAVE THESE INSTRUCTIONS PageIGNITION SWITCH FEATURESSTARTER GRIP STARTER/FAN HOUSING TRIGGER RELEASE THROTTLE LOCK BUTTON CHAIN OILSAFE-T-TIP ANTI-KICKBACKNOSE GUARD UNDERSTANDING YOUR CHAIN SAW SAFETY DEVICESOPERATION LOW KICKBACK SAW CHAINOPERATION KICKBACK PRECAUTIONSFUEL AND REFUELING HANDLING THE FUEL SAFELYOPERATION ADDING OILSTARTING THE ENGINE See FigureSTARTING THE ENGINE OPERATIONPage See Figure STOPPING THE ENGINEOPERATION PagePROPER GRIP ON HANDLES PREPARING FOR CUTTINGOPERATION PROPER CUTTING STANCEWORK AREA PRECAUTIONS ADJUSTING THE CARBURETORBASIC OPERATING/CUTTING PROCEDURES OPERATIONOPERATION ADJUSTING IDLE SPEEDFELLING TREES HAZARDOUS CONDITIONSSee Figures 23 through PROPER PROCEDURE FOR TREE FELLINGOPERATION PageOPERATION PageBUCKING WITH A WEDGE REMOVING BUTTRESS ROOTSBUCKING OPERATIONOVERBUCKING OPERATIONBUCKING LOGS UNDER STRESS UNDERBUCKINGOPERATION LIMBING AND PRUNINGCUTTING SPRINGPOLES See FigureASSEMBLING THE BAR AND CHAIN MAINTENANCEDANGER See Figures 36 throughCHAIN TENSIONING PIN HOLE MAINTENANCEPage 12.Replace the clutch cover and bar mounting nuts MAINTENANCEPage MAINTENANCE ADJUSTING THE CHAIN TENSIONCHAIN MAINTENANCE See Figures 45, 46, andSee Figures 50 through SHARPENING THE CUTTERSMAINTENANCE PageFig. Fig MAINTENANCEPage SIDE PLATE ANGLE MAINTENANCETOP PLATE FILING ANGLE MAINTAINING DEPTH GAUGE CLEARANCEMAINTENANCE MAINTAINING THE GUIDE BARMAINTAINING THE SAFE-T-TIPNOSE GUARD See FigureMAINTENANCE CLEANING THE AIR FILTERMOUNTING THE SAFE-T-TIPNOSE GUARD See Figures 61 andCHECKING THE FUEL FILTER CLEANING THE STARTER UNITCLEANING THE ENGINE REPLACING THE SPARK PLUGSTORING THE CHAIN SAW 1 MONTH OR LONGER CLEANING THE SPARK ARRESTING MUFFLERCHAIN CATCHER MAINTENANCESOLUTION TROUBLESHOOTINGPROBLEM BAR AND CHAIN COMBINATIONSSOLUTION TROUBLESHOOTINGPROBLEM POSSIBLE CAUSEYOUR WARRANTY RIGHTS AND OBLIGATIONS WARRANTYLIMITED WARRANTY STATEMENT PageModel No. UT10510, UT10510A, UT10901A, UT10901B OPERATORS MANUAL14 in. 356 mm 33cc Chain Saw HOMELITE CONSUMER PRODUCTS, INC