OPERATION

by a distance of at least twice the height of the tree being felled. Trees should not be felled in a manner that would endanger any person, strike any utility line or cause any property damage. If the tree does make contact with any utility line, the utility company should be notified immedi- ately.

nOperator should keep on the uphill side of terrain as the tree is likely to roll or slide after it is felled.

nPick your escape route (or routes in case the intended route is blocked). Clear the immediate area around the tree and make sure there are no obstructions in your planned path of retreat. Clear the path of safe retreat approximately 135° from the planned line of fall.

nConsider the force and direction of the wind, the lean and balance of the tree, and the location of large limbs. These things influence the direction in which the tree will fall. Do not try to fell a tree along a line different from its natural line of fall.

nRemove dirt, stones, loose bark, nails, staples, and wire from the tree where felling cuts are to be made.

nNotched Undercut. Cut a notch about 1/3 the diameter of the trunk in the side of the tree. Make the notch cuts so they intersect at a right angle to the line of fall. This notch should be cleaned out to leave a straight line. To keep the weight of the wood off the saw, always make the lower cut of the notch before the upper cut.

nFelling Backcut. As the felling cut gets close to the hinge the tree should begin to fall. If there is any chance the tree may not fall in the desired direction or it may rock back and bind the saw chain, stop cutting before the felling cut is complete and use wedges of wood, plastic or aluminum to open the cut and drop the tree along its desired line of fall. Make the backcut level and horizontal, and at a minimum of 2 in. above the horizontal cut of the notch.

NOTE:  Never cut through to the notch. Always leave a band of wood between the notch and back cut (approximately 2 in. or 1/10 the diameter of the tree). This is called “hinge” or “hingewood.” It controls the fall of the tree and prevents slipping or twisting or shootback of the tree off the stump.

PLANNED LINE

OF FALL

 

 

 

90°

135° FROM

 

 

 

PLANNED

 

 

PATH OF

LINE OF FALL

 

 

 

 

 

SAFE RETREAT

PLANNED

 

 

PATH

135°

 

OF SAFE

LINE OF

 

FALL

 

45°

RETREAT

 

 

 

 

 

90°

45°

135°

Fig. 13

HINGE

2 in. OR 1/10 DIA

NOTCH -

APPROX. 1/3

DIAMETER

OF TRUNK

BACK CUT

 

2 in.

Fig. 14

nOn large diameter trees, stop the back cut before it is deep enough for the tree to either fall or settle back on the stump. Then insert soft wooden or plastic wedges into the cut so they do not touch the chain. Drive wedges in, little by little, to help jack the tree over.

Page 17 — English

Page 16 Page 18
Page 17
Image 17
Homelite UT43103 manuel dutilisation Planned Line Fall, Hinge, Notch Approx /3 Diameter Trunk
Page 16 Page 18

UT43103 specifications

The Homelite UT43103 is a robust and versatile electric string trimmer designed to tackle a variety of yard care tasks. With its user-friendly features and efficient performance, this trimmer is ideal for homeowners seeking a reliable solution for maintaining their lawns, gardens, and hard-to-reach areas.

One of the standout features of the UT43103 is its powerful 13-amp motor, which delivers impressive cutting performance. This motor enables the trimmer to handle tough overgrown weeds and grass with ease, ensuring that users can achieve a clean and polished look in their outdoor spaces. The trimmer is also equipped with a 17-inch cutting width, allowing for wider paths with each pass, which enhances productivity and reduces the time spent on lawn care.

The Homelite UT43103 incorporates a lightweight design that makes it easy to maneuver, even during extended use. Weighing just a fraction of many gas-powered models, this electric trimmer minimizes user fatigue, making it an excellent choice for those with larger yards or multiple areas that require attention. Additionally, the adjustable handle provides custom comfort and control, allowing for easier navigation around plants and obstacles.

This trimmer features a convenient automatic feed spool system, which ensures a continuous supply of trimmer line without the need for manual adjustments. This technology not only maximizes efficiency but also enhances the user experience by reducing interruptions during work. Furthermore, the trimmer is compatible with various types of line and attachments, allowing users to customize their equipment based on specific lawn care needs.

Durability is another characteristic of the Homelite UT43103. Constructed with high-quality materials, this trimmer is built to withstand regular use while maintaining its performance. The trimmer also features a robust guard that protects the user from debris while trimming, enhancing safety during operation.

In summary, the Homelite UT43103 electric string trimmer is an excellent choice for homeowners looking for a powerful, reliable, and easy-to-use tool for yard maintenance. With its efficient motor, automatic feed spool, lightweight design, and durable construction, this trimmer stands out as a commendable solution for achieving a well-groomed lawn with minimal effort. Whether tackling overgrown weeds or fine-tuning edges, the UT43103 makes lawn care accessible and efficient.
Top Page Image Contents