FEATURESELECTRICAL

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

WARNING:

The double insulated system is intended­ to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.

NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the product to your nearest authorized service center for repair. Always use original factory replacement parts when servicing.

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should be connected to a power supply that is 120V, AC only (normal household current), 60 Hz. Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double-check the power supply.

EXTENSION CORDS

See Figure 5.

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

A proper extension cord is available at an authorized service center.

It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 5, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together.

Fig. 5

**Ampere rating (on product data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstruc- tions while you are working with a power tool. Failure to do so can result in serious

personal injury.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

Page 9 — English

Page 8 Page 10
Page 9
Image 9
Homelite UT43102, UT43122 manuel dutilisation Featureselectrical, Double Insulation, Electrical Connection, Extension Cords
Page 8 Page 10

UT43102, UT43122 specifications

The Homelite UT43122 and UT43102 are two powerful and efficient string trimmers designed to meet the needs of both homeowners and landscaping professionals. Known for their reliability and performance, these trimmers come equipped with features that enhance user experience and job effectiveness.

At the heart of both models is a robust, high-performance electric motor that provides ample power for cutting through thick grass and weeds. The UT43122 features a 12 Amp motor, while the UT43102 has an equally impressive 10 Amp motor. These electric motors facilitate quick start-ups with minimal noise, offering a more environmentally friendly alternative to gas-powered trimmers. This makes them ideal for use in residential areas where noise restrictions may be in place.

One of the standout features of the Homelite UT43122 and UT43102 is their innovative Auto Feed String System. This technology ensures that the line is automatically advanced as needed, allowing for continuous cutting without the hassle of manual adjustments. As a result, users can focus on trimming rather than stopping to reload the line, which significantly increases productivity.

Both models are equipped with a 15-inch cutting path, enabling them to cover more ground in less time. This cutting width is augmented by a dual-line nylon string that offers superior cutting power. Additionally, the adjustable telescoping shaft allows users to customize the length of the trimmer to their preferred height, enhancing comfort during extended use.

Furthermore, the Homelite UT43122 and UT43102 boast a lightweight design, making them easy to maneuver around landscapes. The ergonomic handle features a comfortable grip, reducing fatigue during prolonged operation. These characteristics make them suitable for both professional landscapers tackling large areas and homeowners maintaining their yards.

In terms of durability, the construction of the Homelite trimmers is robust, ensuring they can withstand the rigors of outdoor use. The inclusion of a guard also protects the user from debris, promoting safety during operation.

In summary, the Homelite UT43122 and UT43102 string trimmers are equipped with powerful motors, an automatic feed system, and user-friendly features. Their lightweight design, adjustable shafts, and durable construction make them suitable for various trimming tasks, making them a valuable addition to any lawn care toolkit. Whether for professional use or home gardening, these trimmers deliver efficiency and effectiveness in tackling tough yard work.
Top Page Image Contents