SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete draining.
1.Open and remove the oil maintenance cover.
2.Place a suitable container below the engine to catch the used oil, then remove the oil filler cap/dipstick, drain plug and sealing washer.
3.Allow the used oil to drain completely, then reinstall the drain plug and sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin, dump it on the ground or pour it down the drain.
4.With the generator in a level position, fill to the outer edge of the oil filter hole with the recommended oil (see page 37 ).
5.Screw in the oil filler cap/dipstick securely.
6.Reinstall, close and latch the oil maintenance cover.
Wash your hands with soap and water after handling used oil.
UPPER LIMIT
OIL DRAIN PLUG
OIL MAINTENANCE
COVER
OIL FILLER CAP | DIPSTICK |
|
36