83
ASSEMBLY
Wheel Kit Installation
TORQUE:
AXLE
WHEEL(2)
STAND(2)
LONGER
20mm WASHER (2)
8 16mm FLANGE BOLT (4) 4.0 28mm COTTER PIN (2)
816mm
FLANGEBOLT (4)
INSIDE
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
Install the two stands on the under frame using four 8 16 mm
flange bolts.
Install the axle assembly on the generatorusing f our8 16 mm
flange bolts.
If the wheel kit is not installed, it may be possible for dirt and debris tobe drawn into the generator air intake possibly causing generatordamage. Always operate the generator with the wheel kitinstalled.Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
Install the two wheels on the axle using the 20 mm washersand
4.0 28 mm cotter pins.
1.
2.
3.
07/12/21 14:09:32 31Z11710_084