Honda Power Equipment H1000 Mulching Blade, Swirl Guide A Swirl Guide B Cover Plate, Flange Bolts

1.DEALER INSTALLATIONINSTRUCTIONS

MULCHING KIT CONTENTSMULCHING KIT INSTALLATION

Mulching Blade	The mower deck must be removedfrom the riding
	mower to install the mulching kit. Refer to deck
	removal and installation instructions in the
	owner's manual or shop manual.

Swirl Guide A

Swirl Guide B

Cover Plate

6 x 4 0 m m

Flange Bolts (2)

Installation requires drilling additional bolt holes. For your safety, wear eye protection when operating power tools.

1.Remove the blade, blade holder, and discharge chute (or lower chute if equipped with the grass-bagging kit). Use a wooden block to prevent the blade from turning when removing the bolts.

BLADEWASHER \ 9	;k:EmgmoLT
	12 x 25 mm
	FLANGE BOLT(2)
	12 mm LOCK
	-WASHER

6 x 5 5 m m

Flange Bolt (1)

8 x 3 5 m m

Flange Bolts (2)

6 mm Flat Washers (6)

8 mm Flat Washers (4)

6 mm Lock Nuts

(3)

i 'BLADE HOLDER B

BLADE HOLDER A

H3000 Series Model Shown

2.Clean and inspect the mower deck. The deck must be free of dents and deformities for the mulching kit to fit properly.

8 mm Lock Nuts

(4)

2

I