Cutter deck height adjusting lever
This lever is used to raise and lower the cutter deck. To adjust the cutting
height, squeeze the handle lock and then press in and hold the set button.
Raise or lower the lever until the desired cutting height appears on the in-
dicator. At that point, release the set button and the handle lock. Be sure
the handle lock returns to its normal position when released.
Cutting height: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 in (Approx.1
1 IMPORTANT NOTICE 1
l To avoid damage to the cutter deck, always raise it fully when driving
the riding mower to and from’the mowing area; this provides maximum
ground clearance.
l To avoid damaging or disabling the handle locking mechanism, never
attempt to screw the adjusting lever’s set button in or out.
CUlTER DECK HEIGHT
T
12