l Seat safety switch operation check
The seat safety switch automatically stops the engine if the operator’s
weight is off the seat when the following inter-locks are actuated.
- 1. While oarked on a level surface. move the P.T.O. lever to ON
- 2.
- 3.
(Engaged).
Rise off the seat - the engine should stop immediately.
Return the P.T.O. lever to OFF (Disengaged) and restart the engine.
Release the parking brake and place the shift lever in the slow mow-
ing range. While driving slowly, rise off the seat - the engine should
stop immediately.
Move the shift lever back to NEUTRAL and set the park brake. Start
the engine and release the park brake. Raise up off the seat - the
engine should stop. /
l Parking brake system inspection
- 1. Set the parking brake.
- 2. Start the engine.
- 3. Move transmission lever from right-hand position “N” (Neutral) to
left-hand plate. Then make sure that the alarm buzzer starts ringing,
and the engine stops after a few seconds.
- 4. Turn back the transmission lever to “N” (Neutral) position and turn
engine switch to OFF.
If the inspection is abnormal, contact an authorized Honda riding mower
dealer.
32