PRIMARY BELT AND BLADE BELT
ti Wear or damage
1. Move the P.T.O. lever to the OFF (Disengaged) position.
2. Lower the cutter deck as far as it will go with the cutter d.eck height ad-
justing lever.
3. Inspect both belts for wear and damage. If the belts are worn or damag-
ed, replace them according to the instructions on pages 56 and 57.
I Blade belt tension
1. Move the P.T.O. lever to the ON (Engaged) position.
2. Lower the cutter deck as far as it will go with the cutter deck height ad-
justing lever.
3. If the edge of the tensioner arm aligns with or goes past the wear in-
dicator on the cutter deck, adjust the belt tension according to the in-
structions on page 55.
RY BELT
BLADE BELT
INDICATOR
CUTTER DECK TENSlOkER ARM
25