Parking brake lever and warning buzzer
This lever is used to set the brake when the riding mower is parked. Pull
the lever fully up until the ratchet locks.
To set the parking brake, pull up on the parking brake lever until the set
button locks in place.
To release the parking brake, pull the lever up slightly and press the set
button, lower the lever while holding in the button.
The warning buzzer will sound continuously when the following conditions
are present:
Operator in the seat with the parking brake set, the engine switch “ON”
and the shift lever moved from the “N” position.
To prevent operating riding mower with the parking brake set, a delayed
engine cutoff is interlinked with the warning buzzer. The engine will stop
within a few seconds if the parking brake is not released.
IMPORTANT NoTlCE When washing the riding mower, do not spray water
directly into the warning buzzer holes.
WARNIYG BUZZER
LEVER SET BUTTON
PARKING BkAKE LEVER
15