ANTI-SCALP ROLLER ADJUSTMENT
The anti-scalp rollers help to pre-
vent the blades from gouging or
“scalping” high spots. The deck is
designed to “float”, and it is im-
portant to set the anti-scalp rollers
correctly. The setting depends on
the type of terrain being mowed
and the cut height. ANTI-SCALP
ROLLERS
FLAT TERRAIN SLOPING OR UNEVEN TERRAIN
ANTI-SC DECK
ROLLER
SHAFT
For fiat terrain, use the lower hole
in the anti-scalp roller shaft. Align
the hole with the hole on the deck
that corresponds to the selected
cutting height as shown.
For sloping or uneven terrain, use
the upper hole in the anti-scalp
roller shaft. Align the hole with the
mounting hole that corresponds to
the selected cutting height as
shown.
NOTE: Use the lower three moun-
ting holes only.
If the cut height is set at 1 inch, move both rear anti-scalp roller shafts to
the upper holes as shown. Tighten the nuts securely.
29