Cutter Deck Drive Belt Replacement
m Never attempt to change drive belts while the engine is runn-
ing. Remove the engine key from the ignition and disconnect the spark
plug caps to prevent accidental start up.
m
. Wear heavy gloves to protect your hands when replacing belts or when
working with the cutter blades.
l If the tractor has been running, the engine, muffler and radiator will be
very hot. Allow them to cool before proceeding.
1. Lower the cutter deck.
2. Remove the belt tension adjusting knob from the tensioner arm.
3. At the front of the tractor, raise pulley B, and wark the belt off pulley A.
Remove the belt from pulley B.
ADJUSTING KNOB ARM
4. Remove the belt from the cutter deck driven pulley.
CUll’ER DECK
DRIVEN PULLEY
FRONT -
66