l PTO does not rotate
1. PTO lever not set in ON ,Set lever in ON
l PTO cannot be installed
1. Foreign matter on shaft splines -Clean and apply grease (see
p. 86) 2. Shaft not inserted into PTO- Insert fully (see p. 73)
sufficiently
l PTO lever will not shift into ON (gear noise heard)
1. Clutch pedal not depressed -Depress clutch pedal before
shifting
2. Attachment still coasting due to- Bring attachment to complete
inertia stop before shifting
1 HYDRAULIC LIFT 1 l Lift arm does not raise (or raises slowly)
1. Change lever not shifted into -Set in FRONT or REAR
FRONT or REAR fully securely
2. Insufficient fluid in system- Replenish (see p. 35)
3. Loss of fluid WSee your authorized Honda
dealer
4. Descending speed adjusting knob -Adjust speed (see p. 25)
closed
5. Load on lift arm exceeding limits -Follow load limit recommenda-
tions (see p. 55)
6. Faulty hydraulic valve or pump -See your authorized Honda
dealer
l Lift arm lowered by its own weight
1. Lack of fluid in system WReplenish (see p. 35)
2. Lift lever not set in NEUTRAL- Set lever in NEUTRAL
3. Loss of fluid *See your authorized Honda
dealer
4. Faulty hydraulic control valve -See your authorized Honda
dealer
100