2. Rear 3-point hitch attachment installation
Park the tractor on firm, level ground, set the parking brake, and move the
shift lever to “N (Neutral)“. Set both front and rear P.T.O. levers to the
“OFF” when installing, adjusting or removing an attachment.
m Installing, adjusting or removal of an attachment with the
engine running is dangerous and you can be injured. Remove the key from
the ignition, and disconnect the spark plug cap to prevent accidential start-
UP-
a. Place the hydraulic switch lever to
“REAR”, place the lift lever in the
“DOWN” position and fully lower
the lower link.
b. Slacken the check links and open
the lower links as necessary.
c. Install the lower link on the left
side first, then the right side using
the turn buckle adjuster to adjust
for length.
d. Install the UPPER link to the at-
tachment top mast.
e. Adjust length of the UPPER link
with the handle and secure with
the lock nut.
LOWE<LINK
TURNBUCKLE ADJUSTER
TURNBUCKLE ADJUSTER AS1
72 LO& NUT