6. Main transmission lever/Auxiliary transmission lever
Eight forward and four reverse speeds can be selected by shifting the main
and auxiliary transmission levers. For each slotted position of the main
transmission lever, one of two speeds can be selected by either moving
the auxiliary lever up (higher position) or down (lower position).
[LOW GEAR POSITION1
c--,7
[HIGH GEAR POSITION]
r-----Y-\
MAIN TRANSMISSION LEVER
Al IXll IARY
. .-_..-._ . . . .
( IMPORTANT NOTICE ( TRANSMISSION LEVER
l Transmission damage can occur if the clutch pedal is not depress
before moving the shift levers.
l Do not operate the transmission levers while the tractor is moving.
can cause internal transmission damage.
first,
, This
7. Front P.T.O. clutch lever
The lever is used to engage or disengage the front P.T.O. (Power Take Off)
shaft.
Lever in “ON” position-P.T.O. shaft rotates
Lever in “OFF” position-P.T.O. shaft stops
When engaging the front P.T.O., always use a quick, smooth motion to
prevent premature wear.
NOTE: An interlock switch prevents the engine from starting unless the
P.T.O. clutch lever is in the OFF position.
19