8. Rear P.T.O. lever
The lever is u,sed to engage or disengage the rear P.T.O. shaft.
The rear P.T.O. shaft rotates when the rear P.T.O. lever is set in the “ON”
position and the clutch pedal is released.
Lever in “ON” position and clutch pedal is released-P.T.O. shaft rotates.
Lever in “ON” position and clutch pedal is depressedTP.T.O. shaft
disengaged.
Lever in “OFF” position-P.T.O. shaft disengaged.
1 IMPORTANT NOTICE 1 8 e ore operating the P.T.O. lever, completely stop
f
the tractor and depress the clutch pedal to avoid internal transmission
damage.
NOTE: An interlock switch prevents the engine from starting unless the
rear P.T.O. lever is in the “OFF” position.
9. Rear P.T.O. shaft/shaft cover
The rear P.T.O. shaft is a coupling device which is used to transmit power
from the engine to an attachment installed at the rear of the tractor.
Install the cover over the shaft whenever the rear P.T.O. shaft is not used.
m Operating the tractor without installing the cover over the
shaft is very hazardous because clothing or other articles may be caught
on the rotating shaft.
20 P.T.O. SHAFT COVER