8. INSTALLING AN ATTACHMENT
Before installing or using any attachment, carefully read all instructions
and precautions.
m To prevent accidental start-up, remove the engine switch (igni-
tion switch) key, and disconnect the spark plug cap before installing or ad-
justing attachments.
1. Rear 3-point hitch link installation (option)
- 1. Install the hitch box on the tractor with the six bolts and nut nuts.
-2. Attach the check links to the right and left lower links with the check
links pins and secure with the cotter pins.
-3. Install the right and left lower links to the hitch box section with
lower link pins.
-4. Insert the check links to the outside of the lower link pin and secure
with a lock pin.
-5. Attach the lift rod pin to the lift arm.
-6. Install the right side of the lift rod (with the turnbuckle attached) to
the right sides of the lower link and lift arm.
Fit the left side of the lift rod to the left sides of the lower link and lift
arm and secure all attachments with pins.
-7. Install the upper link on the cylinder mounting plate with the four
bolts.
-8. Install and secure the upper link with the link and lock pins.
-9. Check that all parts are installed securely. Tighten the nuts to the
specified torques.
70