UNDER-HOOD CHECKS
1. Opening/closing the hood
To open the hood, pull the hood release knob and lift the hood. Secure the
hood with the hood support rod.
m The hood can accidentally close in a strong wind unless it is
secured with the hood support rod.
HOOD SUPPO
To close, take the support rod down and return it to its clip. Lower the
hood slowly, then close it securely by pushing on it.
Hood removal/installation
Disconnect the headlight wiring connector located. near the right hood
hinge. From its fully opened position move the hood slightly toward its
closed position and raise it up, out of its hinges.
To install the hood, align the hook with the hinge pin on the hood, lower
the hood slowly to set it in its fully open position. Secure the hood with the
support rod and connect the headlight wiring connector.
CONNECT
39