3. Engine Oil
@!%!%I Engine oil is a major factor affecting engine performance and
service life. Running the engine with insufficient oil can cause serious
engine damage. Non-detergent oil and 2-stroke engine oil are not
recommended.
SAE 10 W-30 diesel oil certified to meet or US automobile manufacturer’s
requirements for API Service Classification CC or CD (Diesel oils intended
for Service CC or CD will show this designation on the container).
SAE 10 W-30 is recommended for general, all temperature use. Select the
appropriate viscosity for the average temperature in your area.
NOTE: Use the SAE 5 W-30 diesel engine oil when the ambient
temperature is -2OOC (-4OF) or below.
1. Place the tractor on a level surface.
2. Open the hood and clean the engine block around the dipstick. Remove the dipstick and wipe it clean.
3. Insert the dipstick with the handle ring of the dipstick toward down.
4. Check the oil level shown on the dipstick. If near or below the lower
level mark, fill to the upper level mark with the recommended oil.
5. Install the oil level dipstick securely.
n OIL: API CE, CD, CDII, CC
I 1 -
SAE 1OW
30 1 [ 40
[ low-30 I
TEMP -20 -10 0 10 20 30 40-C I I I I I , 0 20 40 60 80 100°F Ambient
temperature
OIL FILLER CAP
41