NOTE: Push downward on the front tensioner adjusting knob to hold the bracket firmly against the frame. Tighten the bolts to speci- fied torque. Retain the remaining four bolts for later use.
4. Insert front hook of the tensioner spring into the hole in the tensioner arm. The rear hook of the tensioner spring inserts into projecting bracket on tractor frame.
5. install the front hitch pivots onto the frame from the inside (may already be installed). install the tensioner guard on the frame from the outside as shown. Front hitch pivots insert through bracket from inside and retain tensioner guard.
6. Loosen the six 8 x 20 mm flange bolts fastening the right and left link pivots. Slide the lift link shaft through the holes in the pivots as shown. Retighten the 8 x 20 mm flange bolts securely. Recommended Grease: Multipurpose grease.
LIFT LINK
SHAFT
12