Tighten the 1/2" bolts (fig.9, item 1). Refer to the Torque Specification Table
on page 11.
Secure the rear hitch plate (fig.1, item 1) to the tractor by tightening the 1/2" x J bolt (fig.1, item 41, and
then the 1/2" x 1 1/4" bolt (fig.1, item 3). Refer to the Torque Specification Table on page 11.
If necessary, adjust the lift arm (fig.3, item 3) so that the handle section is parallel to the fender with approximately 1" of clearance when it is pulled a11 the way back.
Tighten the 5/8" x 4" bolt
4)on the lift lever to 100
FIGURE g
OM 0149 | 7 |