Honda Power Equipment UMK435E Preliminary Preparation And Checks, unleaded, Super sans plomb

Models: UMK435E

1 67
Download 67 pages 59.35 Kb
Page 29
Image 29
unleaded

Livre_D-GB-F.book Page 29 Mardi, 13. février 2007 8:10 08

GB

PRELIMINARY PREPARATION AND CHECKS

FILLING THE FUEL TANK

The pressure inside fuel tanks may increase when the ambient temperature rises. The cap should be removed with care to avoid any splashing of fuel. Fuel should be stored in a cool place, for short periods of time, and must never be left in direct sunlight.

 

UMK425E

 

UMK435E

Tank capacity

0.55 l

 

0.65 l

Recommended fuel

 

Premium

unleaded

CAUTION:

Clean the fuel tank cap and its edges to prevent foreign bodies from entering the tank.

Fill the fuel tank with a suitable funnel or a jerrycan with a suitable spout.

For easy filling, place the machine in the operating position.

Make sure that the machine remains in a stable position throughout this

SAFETY

operation so that it does not fall over.

 

 

 

 

B3 KEEP FUEL OUT OF REACH OF CHILDREN.Super sans plomb C12

Petrol is extremely flammable and, in some circumstances, it is explosive. Fill the fuel tank in a well ventilated area with the engine switched off. Do not smoke and avoid any flames or sparks in the area where filling is performed and where the fuel is stored. Do not overfill the fuel tank. (The fuel level must be below the filler neck). After filling the tank, make sure that the tank cap is correctly fitted. Take care not to spill fuel during the tank filling operation. Petrol splashes or vapours could catch fire. Make sure that any spilled petrol has evaporated and that vapours have dispersed before starting the engine. Avoid direct contact of petrol with the skin and do not breathe the vapours.

KEEP FUEL OUT OF REACH OF CHILDREN.

FPRÉPARATION ET VÉRIFICATIONS AVANT UTILISATION

REMPLISSAGE DU RÉSERVOIR DE CARBURANT

La pression peut augmenter dans les récipients contenant de l'essence, du fait de la température ambiante. Ouvrir le bouchon avec précaution pour éviter toute projection. Entreposer le carburant dans un endroit frais, pour de courtes périodes et ne jamais le laisser au soleil.

 

UMK425E

 

UMK435E

Capacité du réservoir

0,55 l

 

0,65 l

Carburant recommandé

 

Super sans plomb

PRÉCAUTION:

Nettoyer le bouchon du réservoir et ses abords pour éviter que des corps étranger ne pénètrent dans le réservoir.

Remplirleréservoirdecarburantenutilisantunentonnoirappropriéouunbidon à bouchon verseur.

Pour plus de commodités, placer la machine en position d'utilisation.

SECURITE

Veiller à ce que l'appareil soit en position stable pendant cette opération, afin qu'il ne se renverse pas.

B3 Manual backgroundManual background C12

L'essence est extrêmement inflammable, et dans certaines circonstances, explosive. Remplir le réservoir dans un endroit aéré, moteur à l'arrêt. Ne pas fumer, ne pas approcher de flammes ou d'étincellesprès du lieu où le plein esteffectuéetprès du lieu de stockage du carburant.Veiller à ne pas trop remplir le réservoir d'essence (il ne doit pas y avoir d'essence dans le col de remplissage). Après avoir fait le plein, s'assurer que le bouchon de réservoir soit correctement fermé. Faire attention de ne pas renverser d'essence pendant le remplissage du réservoir. Les éclaboussures ou les vapeurs d'essence risqueraient prendre feu. Avant la mise en marche du moteur, assurez-vous que l'essence renverséeaséchéetquelesvapeurssontdissipées. Eviterlecontactdirectdel'essencesurlapeau ou de respirer les vapeurs. NE PAS LAISSER A LA PORTEE DES ENFANTS.

29

Page 29
Image 29
Honda Power Equipment UMK435E Preliminary Preparation And Checks, F Préparation Et Vérifications Avant Utilisation, B3 C12