Honeywell 3-144, 3-520C Time/Date User Type, Selecting Time/Date, Changing Time, Changing Date

Time/Date (User Type 3.6)

PIN + ent

0 = OMIT ZONES [ent] to Select

7

7 = TIME/DATE [ent] to Select

ent

15:25 01/03/05

A=TIME B=DATE

A> <B

NEW TIME

--:-- HH:MM

enter time

NEW DATE

--/--/-- DD/MM/YY

enter date

15:25 01/03/05 A=TIME B=Date

#

Adjustment/week

*010 (0-120) secs

(press the * key to retard time)

Purpose

The Time/Date option allows the user to modify both the time (hours/ minutes) and the date (day/month/year).

Selecting Time/Date

Enter the QUICK MENU. Press key 7 followed by the ent key. Once the Time/Date option has been selected, the time or date can be se- lected by pressing the A> or <B key.

Changing Time

To change the time press the A> key. The display prompts for a New Time in hours and minutes (HH:MM). When the new time is entered, the display immediately returns to the time or date selection screen. The system does not accept invalid times (greater than 23 hours, greater than 59 minutes). Pressing the esc key aborts the entry.

Changing Date

To change the date press the < B The display prompts for a New Date in days, months and years (DD/MM/YY). When the new date is en- tered, the display momentarily shows the day of the week, before re- turning to the time or date selection screen. The system does not ac- cept invalid dates (e.g. 32/13/99). Pressing the esc key aborts the en- try.

Advance and Retard

It is possible to advance and retard the time to compensate for any variations in clock speed. Press the # key when in the time/date mode to select the clock speed adjustment. The range is 0 to 120 seconds per week. Pressing the * key will retard the time.

16