Wand Emulation Transmission Rate
The transmission rate is limited by the terminal’s ability to receive data without dropping characters. Default = 25 inches/second.
10
* 25
40
80
120
150
200
Wand Emulation PolarityThe Polarity can be sent as standard with black bars high, or reversed with white bars high. Default = Black High.
* Black High
White High
Wand Emulation IdleThe idle describes the state of the scanner when no data is being transmitted. When in Wand Emulation mode, you must set the scanner’s idle state to match the idle state for the device to which the scanner is connected. Default = Idle High.
* Idle High
Idle Low
2 - 12