Secondary Laser Emulation

Note: Models 3800iSR000E and 3800rSR000E require 35122063.bin software.

Contact Technical Support to obtain this software (see Technical Assistance on page 14-1).

Use this selection when connecting to a secondary terminal with integral decod- ing. This also sets the transmission rate to 36 scans per second, the polarity to white high, and deletes all prefixes and suffixes.

*Laser Emulation Same Code Output

When you scan the following bar code, the imager sends the raw data edges to the host for host decoding. This also sets the transmission rate to 36 scans per second and the polarity to white high.

Laser Emulation

Raw Output

When you scan the following bar code, the scanner decodes and re-encodes the data and sends the data to the host as Code 39.

Laser Emulation

Code 39 Output

Laser Emulation Transmission Rate

The transmission rate is limited by the terminal’s ability to receive data without dropping characters. Default = 36 scans/second.

* 36

100

6 - 3