◆Pins 4 and 9 are populated depending on power supply voltage option.
Output Laser | Standard |
connects to your terminal
9 Pin Type D Female
connects to the scanner handle
10 Pin Modular Plug
Start of scan | 1 |
|
|
Digital bar code data output | 2 | 6 | Laser enable |
7 |
| ||
Turn on good read LED or beeper | 3 | Supply ground | |
◆ N/C | 4 | 8 | Cord shield |
Trigger signal to decoder | 5 | 9 | 5 Volt power connection ◆ |
|
|
1Turn on good read or LED beeper
2Trigger signal to decoder
3Laser enable
4 Supply ground
5
6 Digital bar code data output
7 Supply input power (Refer to tables on page
9 Start of scan
10
(Laser Only | Pinouts Cable |
Image) Bar Compatible |
|
5 - 12
Conventional laser data format is provided at the modular connector in the scanner handle. The interface cable is terminated with a 10 pin modular plug, and a 9 pin Type D (squeeze to release) connector that is compatible with all Honeywell terminals.