Wand Emulation
Note: Changing primary wand emulation settings also changes the secondary wand emulation settings (see Secondary Code 39 Wand Emulation on page
Note: This option is not applicable to Laser Emulation Raw Output (see Secondary Laser Emulation on page
This transmits the data in smaller blocks to prevent buffer overflow. Default =
40.
20
* 40
60
80
Delay Between BlocksNote: This option is not applicable to Laser Emulation Raw Output (see Secondary Laser Emulation on page
This sets the delay time between data blocks. Default = 50ms.
5ms
* 50ms
150ms
500ms
Overall ChecksumNote: This option is not applicable to Laser Emulation Raw Output (see Secondary Laser Emulation on page
2 - 13