![Quick Reference (cont)](/images/new-backgrounds/44252/442527x1.webp)
Quick Reference (cont)
The following table lists the “Quick Commands” available with this control.
Key | Description | Keypads | Comments |
# 1 | Quick Arm – if system is ready | All keypads | Allows you to arm the system without requiring your |
|
|
| user code. User code is always needed to disarm |
|
|
| the system. |
# 2 | Force Arm – bypasses faulted | All keypads | Allows you to arm the system even if some zones |
| zones |
| are faulted. These zones will be automatically |
|
|
| bypassed and will be unprotected. |
|
|
|
|
BYPASS | Quick Bypass | All keypads | If not enabled, requires user code with authority 1, |
|
|
| 2, or 3. |
nn (zone no.) |
|
|
|
# 3 | Set Time and Date | All keypads | May require user code. |
# 4 | Zone Directory | LCD* only | Lists each zone with its descriptors. Mode |
|
|
| terminates after last enabled zone. |
# 50 | Quick Help (OMNI624/848 only) | LCD* only | Provides a listing of all quick commands available in |
|
|
| the system. |
# 51 | Show Time and Date | LCD* only | May also require code. |
# 52 | Show Auto Arm Time | LCD* only | May also require code. |
# 53 | User Event Log View | LCD* only | Also needs user code with authority level 1 or 2. |
# 54 | Set Auto Arm Time of Current | All keypads | By partition (OMNI624/848) or system |
| Partition (OMNI624/848) or |
| (OMNI400/600), may also require code. |
| System (OMNI400/600) |
|
|
# 55 | Display Firmware Version | LCD* only | Displays panel’s revision. |
# 56 | Display Key Fob Low Batteries | All keypads | Wireless Key Fob battery test. |
| (OMNI624/848 only) |
|
|
# 57 | Door Strike | All keypads | Activate doorstrike or trigger. May require certain |
|
|
| user code. |
# 58 | Change/View Pager Number | All keypads | For keypad partition (OMNI624/848) or system |
|
|
| (OMNI400/600), only LCD* shows phone number. |
# 6 | Display/Toggle Chime Mode | All keypads | LCD* displays current state first, then offers to |
|
|
| toggle. All others just toggle the state. |
# 7 | Assign User to Other Partition | All keypads | Need user auth. of 1 or 2. Digit 4 (P) enables user |
| or to Activate Paging |
| to page. |
| (OMNI624/848 only) |
| Paging must be enabled and turned on. |
|
|
|
|
# 8 | User Page Toggle | All keypads | Toggles if users should send page for |
|
|
| Open/Close by partition (OMNI624/848) or by |
|
|
| system (OMNI400/600). |
|
|
|
|
# 9 | User | All keypads | Connects to downloader while on line, disconnects |
|
|
| home phone. |
# 0 | All keypads | LCD* displays current enables, 1, 2, 3 – P = 4 | |
| only) |
| NOTE: An entry of 3 is available for the OMNI848 |
|
|
| only |
*
- 4 -