Checking for Open Zones

Using the



READY Key

Before your system can be armed, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING PROTECTION ZONES section), otherwise the keypad will display a "Not Ready" message, and if your keypad has a READY indicator light, it will not be lit. The READY key can be used to display all faulted zones, making it easier for you to secure any open zone.

To display faulted zones, simply press and release the READY key (do not enter code first). Secure or bypass the zones displayed before arming the system.

A "Ready" message will be displayed when all protection zones have been either closed or bypassed and the keypad's READY indicator light (if present) will be lit.

TYPICAL DISPLAYS

WHEN NOT READY TO ARM

AC

N OT R E A DY

4110-002-V0

INDICATING FAULTED PROTECTION ZONE

(AFTER PRESSING READY KEY)

03AC

N OT R E A DY

4110-003-V0

INDICATING "READY TO ARM"

AC

4110-004-V0

14

Page 14
Image 14
Honeywell 4110XM manual Checking for Open Zones, Using Ready Key