Quick Guide to Basic System Functions
FUNCTION | PROCEDURE | COMMENTS |
Check Zones | Press READY key. | To view faulted zones when system not ready. |
|
|
|
Arm System | Enter code. Press arming key desired: | Arms system in mode selected. |
| (AWAY, STAY, INSTANT, MAXIMUM) |
|
Quick Arm | Press #. Press arming key desired: | Arms system in mode selected, quickly and |
(if programmed) | (AWAY, STAY, INSTANT, MAXIMUM) | without use of code. |
|
|
|
Bypass Zone(s) | Enter code. Press BYPASS key. | Bypassed zones are unprotected and will not |
| Enter zone number(s) to be bypassed | cause an alarm if violated. |
| (use |
|
Quick Bypass | Enter code. Press BYPASS key. | Bypasses all faulted zones automatically. |
(if programmed) |
|
|
|
|
|
Silence Sounders |
|
|
Burglary: | Enter code. Press OFF key. | Also disarms system. Memory of alarm remains |
Fire: | Press OFF key. | until cleared. |
"Check": | Press any key. | Memory of Alarm remains until cleared. |
|
| Determine cause. see “Check” and “Battery” |
|
| Displays under TROUBLE CONDITIONS. |
Disarm System | Enter code. Press OFF key. | Also silences sounders. Memory of alarm |
|
| remains until cleared. |
Clear Alarm | After disarming, enter code again. | Keypad will beep rapidly upon entry if alarm |
Memory | Press OFF key again. | has occurred. |
|
| Alarm display will remain upon disarming until |
|
| cleared. |
Duress | Enter user code 8 to arm or disarm "normally." | Performs desired action and sends silent alarm |
(if connected to |
| to central station. |
central station) |
|
|
Panic Alarms | Press key [A], [B], or [C] for at least 2 sec., or | See “PANIC KEYS” for functions programmed |
(as programmed) | (if no A, B, or C on your keypad) | for your system. |
| press keys [1]&[], or []&[#], or [3]&[#], |
|
| both at same time. |
|
Chime Mode | To turn ON or OFF: Enter code. Press CHIME | Keypad will sound if doors or windows are |
| key. | violated while system is disarmed and chime |
|
| mode is ON. |
Test Mode | To turn ON: Enter code. Press TEST key. | Tests alarm sounder and allows sensors to be |
| To turn OFF: Enter code. Press OFF key. | tested. |
|
|
|
