Honeywell 4110XM manual Summary of Audible/Visual Notification, Sound, Cause, Display

Models: 4110XM

1 48
Download 48 pages 25.87 Kb
Page 34
Image 34
Summary of Audible/Visual Notification

Summary of Audible/Visual Notification

SOUND

CAUSE

DISPLAY

LOUD, INTERRUPTED

FIRE ALARM

FIRE and ALARM are displayed; protection zone in alarm

Keypad & External

 

is displayed.

LOUD, CONTINUOUS

BURGLARY/AUDIBLE

ALARM is displayed; protection zone in alarm is also

Keypad & External

EMERGENCY ALARM

displayed.

ONE SHORT BEEP

a. SYSTEM DISARM

a. Only READY is displayed. Green READY indicator (if

(not repeated)

 

present) is lit.

Keypad only

b. SYSTEM ARMING ATTEMPT

b. NOT READY is displayed, open protection zone number

 

WITH AN OPEN ZONE

is displayed.

 

 

Green READY indicator (if present) is not lit.

 

c. BYPASS VERIFY

c. The bypassed protection zone numbers are displayed.

 

(One beep for each number displayed.) BYPASS

 

 

 

 

displayed.

ONE SHORT BEEP

SYSTEM IS IN TEST MODE

Opened Zone identifications will appear.

(once every 40 seconds)

 

 

Keypad only

 

 

ONE BEEP every 40 sec.

TROUBLE

CHECK displayed. Troubled protection zone is displayed.

Keypad only

 

 

TWO SHORT BEEPS

ARM AWAY OR MAXIMUM

AWAY and (if MAXIMUM) INSTANT are displayed.

Keypad only

 

 

THREE SHORT BEEPS

a. ARM STAY OR INSTANT

a. STAY and (if INSTANT) INSTANT are displayed. Red

Keypad only

 

ARMED indicator is lit.

 

b. ZONE OPENED WHILE SYS-

b. CHIME displayed. Pressing / READY key will display

 

TEM IS IN CHIME MODE

opened zone.

 

c. ZONE OPENED WHILE SYS-

c. Open protection zone number is displayed.

 

TEM IS IN TEST MODE

 

 

 

 

RAPID BEEPING

MEMORY OF ALARM

FIRE and/or ALARM is displayed; zone in alarm is

Keypad only

 

displayed.

 

 

 

SLOW BEEPING

ENTRY DELAY WARNING

None during delay; Exceeding the delay time without

Keypad only

 

disarming causes alarm.

 

 

 

If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.

Notes: • BAT displayed (with no beeping or zone number) indicates system main battery is weak see “Check” and “Battery” Displays under TROUBLE CONDITIONS

Also see Power Failure, and Other Displays under TROUBLE CONDITIONS.

34

Page 34
Image 34
Honeywell 4110XM manual Summary of Audible/Visual Notification, Sound, Cause, Display