Bypassing Protection Zones, Using Bypass Key | Honeywell 4110XM

Bypassing Protection Zones

Using the

6

BYPASS Key

This key is used when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first.

When bypassing zones:

•The system will not allow fire zones to be bypassed.

•All bypasses are removed when an OFF sequence (security code plus OFF) is performed.

•Bypassed zones are unprotected and will not cause an alarm if violated while your system is armed.

1.Enter your security code and press the BYPASS key.

2.Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). Single digit zone numbers must be preceded by a zero (e.g. 05, 06).

3.When finished, the keypad will display a "Bypass" message along with each by- passed zone number, accompanied by a beep for each. Wait for these zones to be displayed, to confirm their bypass.

4.Arm the system as usual.

TYPICAL MOMENTARY DISPLAY

OF BYPASSED ZONE

AC

03 BYPASS

4110-001-V0

FIXED-WORD

– 20 –

Image 20

Honeywell 4110XM manual Bypassing Protection Zones, Using Bypass Key

Contents

Ademco 4110XM About This Manual Proper Intrusion Protection Table of Contents Table of Contents Alarms System OverviewGeneral Keypads Memory of Alarm System Overview cont’dFire Protection Burglary Protection About the Keypad Keypad Styles About the Keypad cont’d Summary of System Status Displays Keypad Functions Summary of Keypad Functions Keypad Functions cont’d Emergency Keys Quick Arming Security CodesDuress Code Security Codes cont’d Assigning, Changing, or Deleting User Codes Entry/Exit Delays General Information Using Ready Key Checking for Open Zones Using Stay Key Arms Perimeter Only, Entry Delay On Arming the System Using Instant Key Arms Perimeter Only, Entry Delay Off Arming the System cont’d Using Away Key Arms Entire System, Entry Delay On Using Maximum Key Arms Entire System, Entry Delay OFF Disarming and Silencing Alarms Using OFF KeyTo Silence a Burglary Alarm To Disarm the System Using Bypass Key Bypassing Protection Zones Bypassing Protection Zones cont’d Quick Bypass Using the Keyswitch Arming Chime Mode Using Chime Key Using Panic Keys Panic Keys Panic Keys cont’d Typical Keypad Testing the System Using Test Key Trouble Conditions Check and Battery DisplaysPower Failure Trouble Conditions cont’d Other Displays Case Of Fire Alarm Fire Alarm SystemIf Installed Fire Alarm System cont’d Silencing Fire Alarms Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System Functions Summary of Audible/Visual Notification Sound Cause Display Protection Zones List Owners Insurance Premium Credit Request Ademco 4110XM Owners Insurance Premium Credit Request Regulatory Statements and Warnings FCC / IC Statement Regulatory Statements and Warnings cont’d TELEPHONE/MODEM Interface Event of Telephone Operational Problems Limitations of this System Servicing Information TWO Year Limited Warranty Page Page Page Page ÊN5100V5BŠ