Keypad Functions
SUMMARY OF KEYPAD FUNCTIONS
1.DISPLAY WINDOW: Displays protection zone ID and system status messages.
2.1 OFF KEY: Disarms burglary portion
of the system, silences alarms and audible trouble indicators, and clears visual display after problem's correction.
3.2 AWAY KEY: Arms the entire
burglary system, perimeter and interior.
4.3 STAY KEY: Arms perimeter portion
of burglary system only. Interior protection is not armed, which allows movement within premises without causing alarm.
5.4 MAXIMUM KEY: Arms in manner
similar to AWAY mode, but without the entry delay feature, thus provid- ing maximum protection. An alarm will occur immediately upon opening any protection point, including the entry/exit door.
6.5 TEST KEY: Tests the system and
alarm sounder if disarmed. Refer to TESTING THE SYSTEM section for test procedures.
7.6 BYPASS KEY: Removes individual
protection zones from being monitored by the system.
8.7 INSTANT KEY: Arms in manner
similar to STAY mode, but without the entry delay feature. Entering via the entry/exit door will cause an instant alarm.
9.8 CODE KEY: Used to assign
additional user codes for other users of the system.
10.9 CHIME KEY: Turns CHIME mode on
and off. When on, the opening of windows or doors while the system is disarmed will sound 3 beeps at the keypad(s).
11. READY KEY: Displays all open protection zones.
12.# KEY: "Quick Arm" key permits
ARMING of the system without use of a security code (if so programmed).
13.KEYS
14.READY INDICATOR: (GREEN) Lit when the system is ready to be armed (no faults present). While the system is disarmed, this indicator will go on and off as protection zones are closed and opened.
Note: On some keypads a POWER INDICATOR (GREEN) is lit when AC power is present. If the indicator is off, the system may still be operating, but on its backup battery power. See Power Failure in TROUBLE CONDITIONS section.
– 9 –
