Honeywell 6110 Dolphin QuadCharger Device, Overview, Status LEDs, Charging Slots, Battery Charging, QuadCharger Device, Red The battery is charging

13

Dolphin QuadCharger Device

Overview

The Dolphin QuadCharger device is a four-slot charging station that charges up to four Dolphin 6110 Li- Ion battery packs in an average of 7 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. For more details about charging, see Battery Charging on page 13-2.

!	We recommend use of Honeywell peripherals, power cables, and power adapters that comply with L.P.S. Use
	of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the
	warranty.
!	We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
	damage not covered by the warranty.
!	Ensure all components are dry prior to mating batteries with peripheral devices. Mating wet components may
	cause damage not covered by the warranty.

QuadCharger Device

Charging Slots

Power Supply Connector

Status LEDs

Charging Slots

The charger contains four charging slots. Each slot holds one battery. When a battery is placed in a slot, it immediately begins charging and its Status LED lights.

Status LEDs

A status LED is located at the end of each of the four battery slots. The color of the LED indicates the charge status of the battery in the slot.

Green The battery has completed its charge cycle and is ready for use.Red The battery is charging.

13 - 1