Setting Up the Host Workstation

To synchronize data between the terminal and the workstation, ActiveSync (v4.5 or higher) or Windows Mobile Device Center must be configured for same communication type on both the host workstation and the Dolphin terminal.

ActiveSync

Verify that ActiveSync is configured to use the appropriate communication type.

1.In the ActiveSync window on your workstation, select File > Connection Settings.

2.Check the box next to “Allow USB connections”.

3.Select COM1 from the drop down menu.

Connecting the Dolphin Terminal to the Host Workstation

After setting up both the workstation and the terminal:

1.Connect the Dolphin terminal to the workstation using a Dolphin communication peripheral.

2.ActiveSync or Windows Mobile Device Center should open and connect automatically to the Dolphin terminal.

Synchronizing with the Host Workstation

After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync or Windows Mobile Device Center installed. For additional information visit the Microsoft Phone Web site (http://go.micro- sot.com/fwlink/?LinkId=147001).

Exploring the Terminal from the Workstation

ActiveSync

1.Open the main ActiveSync window (on the desktop).

2.Click Explore. This opens the Mobile Device folder for the terminal in Windows Explorer.

3.The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting.

Windows Mobile Device Center

1.Open Windows Mobile Device Center (on the desktop).

2.Click File Management. This opens the Mobile Device folder for the terminal.

3.The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting.

8 - 11