a.Open ActiveSync and click Explore, orb.Open Windows Mobile Device Center and click File Management

2.On the workstation, navigate to the workstation folder containing the program file(s). Copy and paste the file(s) into the Program Files folder on the terminal.

•If you want the program to be part of the Autoinstall that occurs after a factory reset or software upgrade, paste the program file(s) in both the \\Honeywell\\Autoinstall folder on the storage card and the \Honeywell\Autoinstall folder on the device.

Note: Contact a Honeywell technical support representative for information on how to perform a factory reset. See Technical Assistance on page 13-1.or go to www.honeywellaidc.com.

3.On the terminal from the screen, tap File Explorer, navigate to the folder where the program is located.

4.Tap on the program file to start the installation.

•If you copied the file to the \Honeywell\Autoinstall folder, you can perform a Soft Reset (Press the Reset button using the stylus) to install the program.

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radio (802.11a/b/g/n, Bluetooth). Each radio has its own configuration utility and requires specific information about the wireless network to connect. Successful connection depends on your network infrastructure about which you will need specific information from your network administrator.

WLAN (802.11a/b/g/n)

The Dolphin 6110 has a 2.4 and 5 GHz 802.11a/b/g/n WLAN (Wireless Local Area Network) radio. The radio is interoperable with other 2.4 and 5 GHz 802.11a/b/g/n, Wi-Fi compliant products including access points (APs), workstations via PC card adapters, and other wireless portable devices. By default, the 802.11a/b/g/n radio is disabled after each factory reset. The next step is to configure the connection parameters of the radio to connect to a wireless network.

WLAN Radio

The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by tapping the program icon in the task tray near the bottom of the touch screen. For complete configuration instruc- tions, download the Honeywell Secure Wireless (SWC) Client User’s Guide from www.honey- wellaidc.com. A link to this guide appears on the Dolphin 6110 product page.

Adding Programs Using the Internet

When you have established a network connection, you can access the Internet and download additional software programs.

Note: When selecting programs, verify that the program and version of the program are designed for Windows Embedded Handheld and the terminal’s processor. You can verify your processor by tapping

> Settings > System > About > Version. Make a note of the information in the Processor field.

1.Open Internet Explorer and navigate to the program’s location. You may see a single *.exe or setup.exe file, or several versions of files for different device types and processors.

2.Select the program version that matches your Dolphin terminal and processor.

8 - 13