!We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.

Step 2. Charge the Batteries

Dolphin 6110s ship with the battery pack significantly discharged of power. Charge the battery pack with the Dolphin charging cable until the LED turns green (red while charging). The average charge time for a fully depleted battery is 7 1/2 hours. It takes less time if the battery has some charge.

1.Attach the appropriate plug adapter to the plug of the power cable.*2.Insert the plug into the appropriate power source.

3.Plug the Dolphin power cable into the DC Power Jack (see page 3-7)on the bottom end of the unit.

Important: Removing the battery from the terminal erases all non-persistent memory.

LED Indicators
Red LED OnCharging

 

 

Green LED OnBattery is fully charged

 

 

1

2

3

*This power cable can also be used to power the Dolphin 6110 while in the Dolphin HomeBase (Model 6100-HB)/eBase (Model 6100-EHB) Device (see page 10-1).

!L.P.S. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

!Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.We recommend use of Honeywell peripherals, power cables, and power adapters that comply with

2 - 2