!We recommend use of Honeywell
Step 2. Charge the Batteries
Dolphin 6500s ship with both the main battery pack |
|
and internal backup battery significantly |
|
discharged of power. Charge the main battery |
|
pack with the Dolphin charging cable until the LED |
|
turns green (red while charging). The average |
|
charge time for a fully depleted main battery is |
|
5 1/2 hours. It takes less time if the battery has | 1 |
some charge. |
|
2
2. Insert the plug into the appropriate power source.3. Plug the Dolphin power cable into the DC Power Jack (see page
Note: If you remove the battery pack or it completely discharges, there is a 30 minute window in which
to insert a charged battery pack before the3 backup battery completely discharges. If your
backup battery completely discharges, the contents of the RAM memory will be lost. If your backup battery is less than fully charged, there is a proportionally smaller window of time available.
LED Indicators
Red LED On | Charging |
| |
|
|
| |
Green LED On | Battery is fully charged |
| |
|
|
|
|
! | We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non- | ||
Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. |
DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source.
2 - 2