
Dolphin HomeBase™ Device
This charging and communication cradle supports USB and
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page
Dolphin eBase™ Device
The Dolphin eBase is used to charge the main battery, to power the battery charging system in the terminal, and can be used to communicate data from the terminal to a PC/laptop via the Ethernet port.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page
Dolphin QuadCharger™ Device
The Dolphin QuadCharger device, a
For more information, see Dolphin QuadCharger Device on page
USB Communication Cable for the Dolphin 6500
The USB Communication Cable for the 6500 is used when communicating between the terminal and a PC/laptop via the USB port. The
Li-Ion Battery Packs
The
For information on how to purchase these items, contact a Honeywell sales representative.
Battery Power
The intelligent battery technology inside the terminal features two types of battery power:
•The main battery pack on the back panel (see Main Battery Pack on page
•The backup battery located inside the terminal (see Internal Backup Battery on page
Both batteries work together to prevent data loss when the terminal is used over long periods of time.
Both batteries must be charged to full capacity before using the Dolphin 6500 for the first time! Charge the main battery pack with the Dolphin charging cable until the LED turns green (red while charging). The average charge time for a fully depleted main battery is 5 1/2 hours. It takes less time if the battery has some charge.
3 - 12