6.Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application.

7.Press the Power key to wake the terminal and check the touch panel with the stylus.

8.Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.

9.Press the red Power button to put the terminal back in Suspend Mode on the 28-key Dolphin 6500 or press the Blue then Z (Power) keys on the 52-key Dolphin 6500.

10.Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.

11.Press the Power key to wake the terminal again.

3 - 6